When our camera was out in the renovation centre, one viewer posed the problem of having a cedar fence with the top foot rotten but the rest in good shape. Of course this was probably caused by a square top cut not being protected by a fence post cap. Look around and you will see that most fenc...
One viewer installed drywall, taped the joints, painted and then discovered that there were lumps and uneven areas in the joint plaster. What to do?It is certainly easier to perfect the sanding before there is paint on the wall, so the moral is to really verify your sanding job before saying it ...
When you are working on getting trim to fit tightly around a window, be sure to perfect the mitre corners first, and then cut the square length last. That way, if you have to adjust the mitre, you still have enough length to the wood to fit the other end.One way to assure a perfect fit is to rou...
Yes you can, but it is not always easy to do. The joists may not be perfectly spaced and you only have a 1-1/2 inch target for attaching two edges of the drywall. As well, the floor joists are often not perfectly on the same plane, with one or more of the floor joists being slightly lower or hi...
Dovetail joints are probably the strongest of woodworking joints, and with the right equipment they are suprisingly easy to make.The first photo shows the reversed V shaped bit in a router cutting both the tails and the slotsl at the same time.The second photo shows the results of this cut, stil...
The subject of baseboards came up when Less from Lannigan, Saskatchewan wanted to know how deep trim nailing should go into the wall. The answer is simple, the length of the nail more complicated. A trim nail should go 3/4 of an inch into the stud of the wall. But then you have to add to t...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Adhesives Product: Acoustical Sealant
Temperature Limitations: Product must be above +5 C (+40 F) -- but surface can be below freezing.
Rain Limitations: Apply to a dry surface.
Wind Limitatio...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Sealants (Caulking) Product: Water based caulking / Acrylic Latex
Temperature Limitations: Above +5 C (+40 F) to +15 C (+60 F) depending on brand
Rain Limitations: No rain for 30 min.
Wind Lim...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Sealants (Caulking) Product: Butyl Calking / Sealant
Temperature Limitations: Above -20 C (-4 F) but with product above +5 C (+40 F) to flow easily.
Rain Limitations: Apply to a dry surface
Wi...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Sealants (Caulking) Product: Silicone Caulking / Sealant
Temperature Limitations: Above +5 C (+40 F) and below +27 C (+80 F)
Rain Limitations: Apply to a clean, dry surface - no rain for 30 min...