for Cold Climate Housing and much more

Found 96 results for the keyword ‘Paint’

  • Overview: Finishing Hardwood Floors

    I get a lot of questions about choosing and applying a finish to a hardwood floor.First understand that there is no one right answer -- there are a lot of products that each has certain advantages over the others and you need to select the properties that are the most important to you. There are...
  • Insulating an above grade block wall from the inside

    This article deals with a block wall above grade.  For a below grade block wall see Basement Perimeter Drainage and Leaking Foundations.   Bryan is faced with a totally un-insulated cinder block wall with 1x2 strapping and a plaster covering.  He is thinking about stripping it back to the block...
  • Weather Restrictions: Plastic enamel anti-rust Paint

    Connect to your favourite weather forecaster and look for the following conditions:   Category: Finishes     Product: Plastic enamel anti-rust Paint Temperature Limitations: Use above +10 C (+50 F) and below + 29 C (+85 F) Rain Limitations: No rain for 1 hour Wind Limitations:  No wind if sp...
  • Weather Restrictions: Oil & Alkyd Resin Paint

    Connect to your favourite weather forecaster and look for the following conditions:   Category: Finishes     Product: Oil or Alkyd Resin Paint Temperature Limitations: Use above +10 C (+50 F) and below +32 C (+90 F) Rain Limitations: No rain for 24 hours Wind Limitations:  Don't paint in hig...
  • Insulating a Cathedral Ceiling - OVERVIEW

    Hello Jon, I have a cathedral ceiling with a shingled roof. If I insulate the roof air tight, will the shingles lift and curl as they do on poorly ventilated roofs? The other thought is leaving an 1 1/2 inch space between the roof deck and the insulation  and installing a ridge vent, which give...
  • I painted my bathroom and now I am getting mould!

    Anne painted her bathroom with latex paint and then started to get mould and mildew where she never had any before. She is wondering what she did wrong? Mould is caused by the prolonged presence of condensation. Condensation is caused by a combination of high humidity and low temperatures. If yo...
  • Cleaning & Re-finishing Plastic Patio Furniture

      Almost all of us own at least two outdoor plastic lawn chairs, more properly called resin chairs, if not a whole dining set.  Most of us watch them get dirtier and dirtier every year, until we finally scrap them for something cleaner.  Sitting out in the weather tends to somehow grind them int...
  • Paint peeling caused by a chimney flashing leak.

    John in Mississauga, Ontario has paint flaking off of his crown molding, and it seems to be related to snow on his roof. As we ran through the details, it turns out that the problem spot is right below a brick chimney that is poorly flashed where the roof meets it. He has put asphalt roof patch ...
  • Can I paint over lead based painted walls?

    Yes Wendy, just as you can paint over any other painted walls. You can paint with an oil based paint directly over the lead based paint (which will certainly be an oil based paint). If you want to use a latex over it, then you must first use a "super adherent primer", made by most of the paint ...
  • Paint stripping tips

    Mark from Toronto, Ontario is looking at a good paint stripper that will remove multiple layers of paint from his doors. Professional In a trip to Ross Furniture Refinishing. in Toronto, Ontario, Gino Piazza gave us some tips about how the professionals do it, then we talked about doing it your...