Connect to your favourite weather forecaster and look for the following conditions:
Category: Adhesives Product: Contact Cement - Water Based (Solvent Free)
Temperature Limitations: Use above +18 C (+65 F)
Rain Limitations: Dry surface
Wind Limitations: High winds will accelerate sett...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Adhesives Product: Interior Carpet & Sheet Vinyl Adhesive Latex
Temperature Limitations: Floor and adhesive must be above +18 C (+65 F) prior to application.
Rain Limitations: Indoor produc...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Adhesives Product: Indoor/Outdoor Carpet Adhesive
Temperature Limitations: Apply when both surface and product are above +18C (+65 F). Store product above -12C (+10 F).
Rain Limitations: Keep ...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Adhesives Product: White & Yellow Exterior Carpenters Glue
Temperature Limitations: Surface and glue must be above +10 C (+50 F) during application - some glues require warmer.
Rain Limitat...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Adhesives Product: Polyurethane carpenter's glue (i.e. Gorilla Glue)
Temperature Limitations: Surface and glue must be above +20 C (+68 F) and below +45 C (+113 F)
Rain Limitations: Must remain...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Adhesives Product: Polyurethane Construction Adhesive
Temperature Limitations: Above +5 C (+40 F) and below +30 C (+86 F)
Rain Limitations: No rain for 1 hour
Wind Limitations: n/a
Humidity ...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Adhesives Product: Thermal Plastic Construction Adhesive
Temperature Limitations: -25 C (-13 F) to +60 C (+140 F) -- varies widely by product
Rain Limitations: n/a
Wind Limitations: n/a
Hum...
When you want to attach tiles where you would have to support them while the adhesive dries, like on a sloped surface or a ceiling, Chester from Metochosin, BC has a solution.
Put the ceramic adhesive around the outside edge and then apply some hot glue to the centre. Push it into place and hold...
Tooling Caulking
Brad, who works in the trade of caullking high rise buildings, sent in the tip of dipping a shaped piece of wood into Sunlight detergent before tooling the caulking. This gives the caulking the exact shape you want, but nothing sticks to the wooden tool. Note that his tool is n...