for Cold Climate Housing and much more

Found 444 results for the keyword ‘Techniques’

  • Tying knots in rope

    One of the most frustrating things is trying to make a long rope out of all sorts of short pieces, especially when they are different thickness. So here is the splicing knot for different sized ropes.Make a loop with the larger rope. Run the end of the smaller rope through the loop. Wrap it...
  • Which sandpaper do I need for which job?

    Sandpaper is expensive and there is a lot of it to choose from, so you want to get the paper that will do whatever sanding job you want to do most efficiently. Whether you are working by hand or with some kind of a power tool, the right sandpaper is more important than the tool itself.Look o...
  • Speciality drywall spatulas for corners

    If you have ever undertaken the task of applying tape and drywall compound on an inside corner, you know it is hard to work on one side without bothering the other side. You may not realize it, but there exist special spatulas for this job. The 'inside corner spatula' has two faces that are spr...
  • Cleaning stains off of Stainless Steel

    It almost sounds like an oxymoron to talk about removing stains from stainless steel, but the reality is that there are many grades of stainless steel and they are not all resistant to all stains. In fact, anything stuck to stainless steel for a long period of time will probably leave a mark...
  • Electrical wiring confusion -- dim lights

    Mat from Wellen, Ontario followed his buddy's instructions for wiring three lights together with a single switch on the other end of the room. They all came out dim.This is exactly why most provinces require you to get permits for electrical work, or even require licensed electricians for all...
  • Tools for working with veneers

    True wood veneer consists of very thin sheets of real wood shaved off of logs. It can look like the grain of plywood if it is peeled off of a rolling log, or look like furniture lumber if it is sliced flat like boards right across the log. It was developed as a way to use sturdy but inexpen...
  • Plugs for hiding screws in wood

    When you want to hide a screw in woodworking, you need to either use a series of drill bits to make first the plug hole, then the clearance hole for the screw to go easily through the first piece of wood, then the pilot hole for the threads to grip in the second piece of wood. Or you can use...
  • Applying Stucco to a ceiling

    Although some people simply want a rough stucco look on their ceiling, the primary reason so many ceilings are stuccoed is to hide a poor drywall job. Yes, stucco will cover many faults. It is also very forgiving to work with.Whether you apply it with a compressor system or with special loop...
  • Sharpening hand saws - Western and Japanese

    The first step in sharpening any hand saw is to sandwich it into a vise or between two pieces of wood that can keep the metal from vibrating, and driving you crazy, while sharpening. This is not just for comfort. If the blade vibrates too much, the file cannot dig into the metal.Next you ne...
  • Floating Shelves

    David from Kingston, Nova Scotia had a question about a floating shelf he was trying to build himself, but before answering his question I wanted to show some commercial 'floating' shelves that you can purchase.Just what is a 'floating' shelf? It is a shelf that appears to have little or not...