for Cold Climate Housing and much more

Found 129 results for the keyword ‘Floors’

  • Refinishing hardwood floors -- without sanding

    "Renewal" is the name of a floor refinishing product/system from Flecto-Varathane.You take of any wax first. They only mention that in fine print and don't provide a wax remover, but the system will fail if you leave old wax on the floor.Then the first product in the system removes the scuff mar...
  • Massive or Engineered hardwood floors?

    Darren Barrett from the Hardwood Flooring Store in Markham, Ontario and a long time expert in hardwood floors joined me in the TV studio to discuss the evolution of hardwood flooring. We set aside for this discussion all the plastic laminates with press board bases that have become so common. N...
  • What kind of joists do I prefer?

    Mila from Ottawa, Ontario writes: "We are buying a new home and have a choice of 2" x 10" solid wood kiln-dried joists or "Trust Joists" (JLE) Pre-engineered floor system. If you were buying a house for yourself -- which would you choose?"I just love it when people try to nail me down like that,...
  • A special screw device for squeaking floors

    You have probably seen this gadget called Squeeek-No-More in the store or at home show demos and wondered if it actually works. It does, under certain conditions. The idea is to drive a screw into the floor, perhaps right through the rug, have the threads hold in both the floor joist and in the ...
  • Details on Engineered Floor Coverings

    To my mind old fashioned hardwood floors are far more trouble than they are worth, especially now that we have better and better Engineered Floors available. An engineered floor is not a cheap plastic laminate on masonite floating floor. It is a very stable, usually pre-finished, real massive h...
  • Stone counter tops -- making your own

    You may have seen pebble stone-like floor decorations in some commercial entrance ways. It is made by collecting various textured and coloured, pebble-size stones, from quarries throughout the US and Canada, mixing them with an epoxy binder and laying them out in a continuous or an artistic mosa...
  • It is all wet behind the shower tiles. Why?

    Ed writes from Ajax, Ontario : All 3 walls of my bathroom shower stall are finished with 4" ceramic tiles and are in good shape. When I had to remove one of them, I discovered that the drywall was behind it was so wet that I had to put a fan on it over night to dry it out before I could glue...
  • How do you remove old glue from under rugs?

    Getting the adhesive or even old pressed down underpad off of floors is never easy. Not much of anything dissolves it, although you could try several different solvents.Start with hot water and soap--it just may be water soluble.If there is a clear varnish on the wood under that glue, you can us...
  • How to remove carpet adhesive.

    Carpet or tile adhesive can seem almost impossible to remove from a concrete or wooden floor, especially when it has been there for a long time. If you try sanding, it will heat up and clog up the sandpaper. If you wire brush it with a wire wheel on your drill, again if you let it heat up, it w...
  • Radiant Heating Systems for Homes

    Radiant Heating and Convection Heating are the two primary types of ways we heat our houses. FORCED AIR HEATINGConvection heating means moving hot air -- what we usually call a forced air heating system simply heats air and moves it around the house through a system of fans and ducts.  Forced air...