-- Take care of air barriers, ventilation and vapour barriers before insulating. Check out these three topics in the Search Tab above.-- Don't block the eave vents with insulation.-- Do cover the top of the outside wall.-- Don't put plastic foam on top of porous insulations (batts, loose fill) a...
Ed writes from Ajax, Ontario : All 3 walls of my bathroom shower stall are finished with 4" ceramic tiles and are in good shape. When I had to remove one of them, I discovered that the drywall was behind it was so wet that I had to put a fan on it over night to dry it out before I could glue...
Here is a great tip from one of our viewers. To remove that light bulb from the tight halogen fixtures where there is no room for your fingers, simply wad up a piece of duct tape with the sticky side out. That will grip the bulb for unscrewing.You could even tape that wad to the end of a broom ...
When you are working in an older house and pull down that ceiling light fixture, you may discover a wiring job that could be endangering your house. By code, and for good reason, all electrical connections must be made inside metal boxes that are accessible. That means that you don't cover junc...
The smoke test described in the previous answer should be used to verify the presence of typical leaks and discover those peculiar to your own house. Before sealing, read the section on Ventilation to avoid any future condensation problems.
The leaks high in the house are not necessarily the lar...
Rick writes: I HAVE BEEN TO YOUR WEB SITE BUT STILL HAVE SOME QUESTIONS ON THIS TOPIC. HERE GOES: FIRST, IF THE OVERHEATING OCCURS, WHY DOESN'T THE CIRCUIT TRIP? AN ELECTRICIAN TOLD ME THAT IF I HAD A SWITCH PANEL VERSUS FUSES, THAT THIS WOULD PROTECT ME!
Both fuses and circuit breakers (neither...
I don't really have an answer to the question, but I can help you to understand what they mean.
We could find no plumber, nor plumbing manufacturer who could actually tell us the origin of the plumbing code for rubber washers. My guess is that it probably had something to do with the inside diam...
We all like the ability to reduce the intensity of a light, but not all dimmers work on all lights. First a really important distinction: Fan speed controls and light dimmers often look almost identical, but are radically different devices, not to be mixed up at the risk of burning out a motor or...
THE WIRE WORKS, THE CONNECTIONS ARE THE PROBLEM
Aluminum wire does a good job of conducting electricity (although you do have to use one size larger wire than copper for the same electrical load) and can do the same job for less money. So for a short while it was used in houses for regular wirin...
