Riana from Huntsville Ontario is struggling with getting the miter cuts right for crown molding.
First rule, use a large miter box (purchased, rented or home made) that allows you to make simple 45 degree with the molding standing up in its regular position. Well, almost in its regular position....
Trying to get a square cut on the top of a fence post or deck post can be a difficult job. Rick sent us in his jig that does the job nicely. He nails two pieces of plywood together at 90 degrees and then puts small guide rails on the sides. He then takes his circular saw and cuts the jig off, ...
How do you get floor boards or cabinet making lumber from old growth trees without cutting a single tree out of the old growth forests? You pull it up off the bottom of the Ottawa River and its tributaries and mill it at "Logs End" near Bristol, Quebec.Those where the major waterways where the b...
We got this question from a store customer who was trying to decide which blade to buy?Wobble Washer Dado BladeThe first photo shows what we call a "wobble washer" blade. Actually the blade itself isn't wobbly, but the washers on both sides are bevelled. You can rotate them to skew the blade in...
Scissors have the flat side where they two blades rub, then a cutting bevel followed by a relief bevel. So how do you sharpen them? Get the flat side flatStart by using a stone to remove any nicks that stick past the flat side. Just put the stone on the flat and grind until the entire side is ...
Cutting ceramic tiles in half is relatively easy to do. Cutting a half inch off the edge of a tile is much more difficult.Al from Chilliwack, BC shared his tile cutting jig with us. Clamp two boards together with spacers the thickness of the tile to be cut. Score the tile. Slide the tile into...
Scoring and snapping drywall is very easy, if you are not near the edge of the board.Sawing it is pretty messy and planing off the edge is long and messy as well when you just want to trim an inch or so from the edge.The secret is to have a special drywall edging tool that has two spiked wheels t...
True wood veneer consists of very thin sheets of real wood shaved off of logs. It can look like the grain of plywood if it is peeled off of a rolling log, or look like furniture lumber if it is sliced flat like boards right across the log. It was developed as a way to use sturdy but inexpen...
When you need to cut heavy sheet metal, like the fire-rated door cover that we saw in this TV show, regular shears are not good enough. You could do it with a metal cutting blade in a jig saw, but that is very slow.
The professional will use electric shears that make the job easy, but they are o...
The larger and wider the blade, the more power is required to drive it through wood. When we are talking about corded tools, this usually translates into a question of weight and over-all size of the saw. Using a very large and heavy saw for light duty work is simply cumbersome and tiring. When w...
