A rough plywood shelf edge will not look good if you simply paint it with the rest of the shelf.Even after sanding it smooth, it will not take paint well. And if you are going to paint the shelf, you shouldn't waste your time and money trying to put glue-on trim on the edge.To get it to look good...
When part of the porcelain paint pops off of metal sinks, your only DIY recourse is to use the little bottles of touch-up.First you have to find one that is the right colour, not always an easy task.Then you have to get it to stick. The manufacturers all say to just clean the surface and then ap...
Earlier in this TV segment we installed a threshold between an old and a new floor. In that case we actually cut away to a flat base that allowed us to put our threshold down flat. If you cannot do this or for some reason need to fill in a low spot in a floor before putting in the threshold its...
If you are tired of trying to put tape on the edge of Melamine boards, or can't avoid those surface chips that always show between the surface and tape, there is a new Melamine putty made to replace the tape.You put one or two coats on, flow it right over into those surface chips and sand it down...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Adhesives Product: Polyurethane Construction Adhesive
Temperature Limitations: Above +5 C (+40 F) and below +30 C (+86 F)
Rain Limitations: No rain for 1 hour
Wind Limitations: n/a
Humidity ...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Asphalt Product: Acrylic sealer for Asphalt Driveways
Temperature Limitations: Above +10 C (+50 F) and below +30 C (+85 F)
Rain Limitations: No rain for 24 hours
Wind Limitations: n/a
Humidi...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Asphalt Product: Asphalt emulsion sealer for Asphalt Driveways
Temperature Limitations: Above +10 C (+50 F) and below +38 C (+100 F)
Rain Limitations: No rain for 24 hours
Wind Limitations: n...
Glue or Adhesive?
What is the difference between a glue and an adhesive? Only vocabulary, although often Glue is the term used for DIYers and Adhesive for professionals -- or for some Glue is liquid and Adhesive is gunned from a tube with a caulking gun or applied with a notched trowel. Whether...
Several of you have sent in the tip of using sawdust or wood shavings, mixing it with glue to make a putty, rather than buying a commercial putty. So I put my props maker to work. Using all the same wood shavings, but three different glues he got three different results. First a tip he came up wi...
Our TV camera found Lawrence in a store: "When you are using MDF boards, what is the best wood filler to use?"
Medium Density Fiberboard or MDF is that very dense compressed sawdust that is formed into panels and all kinds of molding. When filling nicks and dents in this material, it is importan...