CUTTING FIBERGLASS STRAIGHT AND SQUARE
It is always easier to cut fiberglass batt insulation if you compress it down as flat as possible. That way you can get through in one pass. Using a piece of plywood gives you a straight edge at the same time.
There is a special devic...
Probably one of the best ways to learn about good and bad building techniques is to work on the renovation or restoration side of the construction picture. Here is where you see the results of everything done before, especially when the results are a failed system. In the world of ceramic, stone ...
Low flow toilets: do they work? do they not work? This is an ongoing very interesting debate. This history of the evolution was first written in 2001. For the latest updates on this story and current data on toilets that do work, click here.
The average Canadian household uses between 7 hundred...
Leafs and other debris clogging up the rain gutters can be the death of a roof. On a one story bungalow you can pretty easily keep those gutters clean but when things are higher up, or you have a lot of mature trees in the yard, it can be a big maintenance task. If you have tried any of the scree...
Bathroom and kitchen fans are rated to move a certain volume of air, but do they actually move what they say they move? A study done in 1990 by CMHC says "rarely". In fact, on the average, measured volumes were 44% of rated flow for bathroom fans and 38% of rated flow for kitchen fans. The primar...
This was the first part of a special three part series designed to give you some insights to the business side of renovation because hiring a contractor and getting the job done right is a business deal. In this segment we tried to give you an idea of the advantages and disadvantages of each diff...
When Heritage Window Restoration becomes
an energy efficient & cost effective
alternative to new windows
Most of us who have worked in older neighbourhoods have at one time or another thought about or dabbled in restoring old building components rather than ripping out and installing new...
One of our viewers is about to insulate his basement and he has been told that he should not run the vapour barrier all the way to the floor. Fact or fiction?
You should run the vapour barrier wherever there is insulation to keep the moisture on the warm side of the wall. And in a basement insta...
The best way for air to move through a duct is to have a straight duct with a smooth inside wall and a round form will have the smallest surface area to cause the air to slow down. That straight smooth round duct is what is considered the benchmark for good ducting.
Everything else is measure...
For an overview on changing the roof or roof covering on a house and special information on Mansard roof shingles -- follow this link.
The starter shingle
If you put the first row of shingles on the edge of the roof just like all the rest, you will see the bare roof deck through the crac...