Lorraine from Elliot Lake, Ontario has mould growing out from the joint between the wall and the ceiling in her bedroom. This is a common problem caused by the fact that most houses are built with two pieces of wood on the top of the wall called a ?double header?, with no insulation at this spot...
Crown molding is traditionally cut at a straight 45 degree miter with the molding sitting upright in the miter box. The only trick here is to realize that the saw bed is the ceiling, and the saw fence is the wall, so your molding is sitting upside down in the box. That was fine when we used...
We followed Jerry Cloemenzi?s use of special tools during the professional installation of real plaster crown moldings.Of note: he used a framing hammer to punch holes in the drywall right where his plaster was going to glue the molding to the wall. That gave him great toothing into the wall....
Leo Montagnese with Omega Modern Mouldings in Woodbridge, Ontario makes faux stone mantels that look like real carved stone. When you look at one and compare it to a plaster-molded mantel, you notice that the colour is different, but mostly that there are interesting and random holes in the ...
A viewer sent in the simple idea of pushing finishing nails through a piece of corrugated cardboard to hold them steady while you come down with the hammer. That means that you don't come down with that hammer on your fingers. They you simply pull the cardboard up and finish driving the nail.Le...
John in Scarborough wanted to put a ceiling fan above his stairwell, but the existing electrical outlet was not in the middle. He tore the whole ceiling up (attic insulation and all) to manage to move the box over to the middle.We talked about his project and then I showed him the new light weigh...
When trying to salvage baseboards or other moldings you need to be careful not to destroy the face by driving the nails out the front.Rather, take a pair of locking pliers to grab the finishing nails from the back side as in the photo and then roll along the round jaws of the pliers and force the...
Floor mouldings and crown mouldings were originally all made out of heavy plaster or real wood. Then they were produced out of MDF or compressed sawdust. Now you can find them made out of plastics and drywall as well.ProFlex is a rubber like moulding that is the champion at following curves...
If you want to install gingerbread trim so the screws don?t show, drill clearance holes through an open part of the trim towards the rake boards or fascia boards of the house. Drill pilot holes into the fascia so that you will not split it with long screws. Then screw it into place.
If you need ...
Our TV camera found Lawrence in a store: "When you are using MDF boards, what is the best wood filler to use?"
Medium Density Fiberboard or MDF is that very dense compressed sawdust that is formed into panels and all kinds of molding. When filling nicks and dents in this material, it is importan...