Ed writes from Ajax, Ontario : All 3 walls of my bathroom shower stall are finished with 4" ceramic tiles and are in good shape. When I had to remove one of them, I discovered that the drywall was behind it was so wet that I had to put a fan on it over night to dry it out before I could glue...
Janice from Clarenville, Newfoundland has a toilet that has a mind of its own. Setting aside the possibility that it is not a toilet at all but rather one of those strange European bidets, my best guess on this one is a partial blockage that is interfering with one of the jets of water that serv...
We visited Anne's roof in a previous show where she had three different types of roofs, no flashings and inadequate transitions between each roof, and of course water buckets in the house. In fact one roof was only six years old, the centre part in good shape but the flashings letting in enough ...
Debbie from East York, Ontario has a problem with a basement leak that apparently is caused by a crack between the sidewalk and the wall. Her contractor patched it last year, but it leaked again.If there is any movement of the sidewalk, from frost or just swelling and or shrinking clay, then no ...
Brian from Cornwall, Ontario just bought a house and when it rains heavily, it flows in the basement. Someone recommended that he dig a trench inside the basement to drain the water away.First of all, see if simply landscaping sloping away from the house, and rain gutters and downspouts away fro...
Lisa in Markham Ontario has a real water problem because her contractor did not follow the architect's plan for the construction of a concrete veranda around most of her house. The architect had planned a membrane below the concrete as well as a curb between the deck and the house wall. Non...
If you connect copper plumbing pipes directly to galvanized plumbing pipes, or even let a copper pipe touch a galvanized heating duct, you will get an electrolytic reaction between these two metals. The reaction is accelerated if the pipe is hot, so this is worse with hot water lines than cold o...
Changing a faucet is a simple task that you actually should do once a year, to avoid having it ever drip. The general concept is easy enough, but here are some useful working tips:Put a plug or strainer in the drain first, to catch screws and other little parts. This avoids having to extend ...
Brian in Calgary just can't get the handles off of his faucets in the shower. He has tried to pull them off until his hands are raw. When he tried to pry them, he discovered that the plumbing in the wall is not stable and the pipes move forward. He tried WD-40 and CLR to get the handles to...
George sent in his tip of using a pulley or bearing puller to get faucet handles off of the stem without having to bang them all up. He takes out the retaining screw and puts in a headless screw to give him something for the puller to push against. Then the puller just grabs the handle and you ...
