for Cold Climate Housing and much more

Found 11 results for the keyword ‘Propane’

  • BBQ Face-lift.

    Tips and tricks for tuning up your propane BBQ.Of special importance is making sure that there are no spider webs in the line leading from the tank to the burner -- this could cause a dangerous flash-back.Also new OPD valves on propane tanks, identified by a triangular shaped handle, will prevent...
  • Radiant Heating Systems for Homes

    Radiant Heating and Convection Heating are the two primary types of ways we heat our houses. FORCED AIR HEATINGConvection heating means moving hot air -- what we usually call a forced air heating system simply heats air and moves it around the house through a system of fans and ducts.  Forced air...
  • Can you switch the gas / propane sources on a BBQ?

    Gabe from Toronto wants to know if he can get a conversion kit to switch his propane BBQ to natural gas.The answer is NO.Unfortunately the propane hose and the natural gas hose has the same size threads so it is possible to simply screw one type onto a BBQ made for the other type. But that is qu...
  • Use a propane torch to round the edges of Plexiglas.

    Woody from Kingsville, Ontario has a great tip for giving your Plexiglas project a smooth flowing rounded edge.First sand out any saw cuts or other imperfections, but rather than trying to sand over the sharp edge, hold a propane torch about 4 inches from the edge and slightly melt the plastic. ...
  • Barbeque tank safety and new level meters

    Never use a propane tank where the protective shield around the valve has been bent up enough or broken in such a way that it no longer protects the valve from getting hit. When a tank is seriously rusting, change the tank. It small scratches have begun to rust, repaint with a rust proofing...
  • A safety correction about penetrating oils and propane torches.

    David from Victoria, British Columbia is a safety officer in his workplace. Last year he saw me putting penetrating oil on a rusted nut and then heating it with a propane torch to break it loose. Bad stuff he says. Heating oils like that can be very bad for your health, as was the case of a custo...
  • Should I change to All Electric heat?

    All-Electric heating can mean many things: baseboard heating / baseboard with split head high wall mounted non-ducted heat pumps / an electric central forced air furnace with or without a heat pump / or an electric central boiler for a hydronic system.  If you are thinking of removing your Oil o...
  • OVERVIEW: Frozen pipes: Tracing, thawing, preventing.

    As weather patterns change we are getting longer colder periods than traditionally in many areas of the country -- and with that, more and more complaints of water pipes freezing. Finding the frozen point can be difficult, thawing it can be problematic but if you have done those two, go one step ...
  • Does your soldering job leak? Why is lead-free solder hard to work with? And new products to make life easier.

    They took the lead out... Several years ago, throughout North America lead was removed from the solder used for making joints in copper pipes intended for carrying drinking water, just as before that we had removed lead from paint. Lead based solder is still available in stores for other tasks, ...
  • Quebec all-electric? Not possible and not even a valid objective!

    EN FRANÇAIS There is an elephant in the room – QUEBEC GETS REALLY COLD.  The ecological dream of an all-electric urban society is suicidal in a cold climate like Quebec. Extended power system black-outs are a reality of life in Quebec.  Every few years electrical system black-outs have forced...