for Cold Climate Housing and much more

Found 30 results for the keyword ‘Shower’

  • Drilling & Replacing ceramic tiles -- even with your own photo

            DRILLING A TILE When you want to hang something on ceramic tiles you will need to drill a hole. Regular metal cutting twist bits will not cut through the hard ceramic face, and in fact the ceramic material itself will destroy such a bit. You need to use a bit that has a carbide head....
  • Preventing leakage through a shower floor

    It always surprises people to learn that neither siliconed grout nor glazed tiles are totally waterproof. If there is not a waterproof membrane below the tiles, the heavy flow of water in a shower would eventually soak through the base and rot out the floor below. No amount of silicone sealant no...
  • Overview - Building the base to a tiled shower.

    Most people don't realize it but glazed tiles are not completely waterproof although they are highly water resistant. The reality is that the tile and the grout are not the final line of defence against water leaking through to the ceiling below. A proper built-in shower stall starts with a tape...
  • Removing silicone caulking

    Bill from British Columbia sent in an e-mail asking how to remove silicone caulking from his acrylic shower floor. For many years we had nothing that would remove silicone caulking from a bathtub. Then all the companies came out with silicone caulking removers. Then they all disappeared (or will ...
  • Where does the noisy drip in the plumbing stack come from?

    Wayne from Prince Albert, Saskatchewan writes: "I hear a constant dripping in my 4 inch sewer stack that connects my upstairs toilet drain to the floor sewer. It is not coming from the toilet but since the venting goes to the roof it is possible that during the winter, warm air is rising, condens...
  • Two Water Problems: Burn like sulfur smell and Milky looking water

      Burn Smell in the shower Bill from Newcastle, Ontario gets that smell in the morning and wants to know how to get rid of it. This is not a common problem, but it is certainly not unknown. It is not common because it requires a specific set of circumstances to create this problem. First it re...
  • Cleaning Shower Heads and Faucet Screens

      The easiest way to clear mineral deposits out of faucet screens or shower heads is to soak them in either vinegar or CLR, they both work, the CLR is just faster.       Either soak them in a bowl, or if you don't want to take them off, then hang a bag of vinegar over the head, right in ...
  • Stopping Plumbing Floods & Flood Alarms

    I like to look at history and tell stories, but if you are not the type that likes to read a lot and all you want is to control your water flow – jump down to the best plumbing flow control systems to date:  my experience with AquaTrip (from Australia and no longer available in Canada) and the ne...
  • Making slippery surfaces not slippery

    One of the most common places for accidents to happen in the home is in the bathroom. You are not dressed to be protected, and there is both water and slippery surfaces. Bathtub mats and anti-slip decals do make life safer, but much more difficult to keep the tub clean.   SLIP PROOF ETCHING WIT...
  • Vent Stack Ice Capping or Evaporation : I GET SEWER ODOURS INSIDE THE HOUSE OCCASIONALLY IN THE WINTER.

      This is one of those problems that are not dealt with seriously enough by the building officials in really cold regions.  I have opened a blog space at the bottom of this article for you to add in your case history so we can demonstrate that this is a large and continuing problem.  Take a look...