It may look easy when a professional is repointing brick, but there are some things to be very careful about.If you are using a grinder to remove the old mortar, be careful to avoid cutting into the brick. It is easy enough to slide up or down hill with the grinder, and even easier to mess it up...
Boris lives in a 45 year old bungalow that has no insulation at all. It has a brick outside, an air space, a concrete block wall for structure inside and then drywall. Is it possible to blow foam into the space between the brick and the block?NO. As long as the brick is the weather shield for ...
Some tools go un-noticed on the hardware store shelves, like the rotary hammer chisels. At first glance this appears simply to be a heavy duty hammer drill. It has a special quick change chuck called an SDS system and will only work with drills and other accessories with the special SDS shanks....
In this segment we took a look at a very interesting product where thin "bricks" made out of concrete extrusions are hung on metal racks. The end result is very similar to a fancy brick wall.How does it keep the rain out? Actually the same way a regular brick-and-mortar wall does, or a vinyl...
When the mortar on your brick is breaking up a bit, or scaling off, you cannot simply put a skim coat of new mortar over the old, it will not hold. If someone has done that before on your house you know it doesn't hold, that is why you are redoing the job now.Mortar sticks to the brick, not t...
As with most trades, when a tradesperson lays a brick, it looks so easy, and when you (or I ) try it, it doesn't work so easily. So I went to the trades training section of George Brown College in Toronto, Ontario to pick up some of those little tricks that make it all so easy.First trick I l...
Do not fill the space between brick siding and the sheathing.
First, this space is outside the sheathing and does not cause condensation, as does an air space inside the wall. (A small space between ordinary siding and the exterior insulation or between ordinary siding and sheathing is also perm...
First, don't put glazed or other slippery tiles on an outdoor porch. You will kill yourself when they get wet or icy. You can find some good looking tiles that are specifically designed to be "non-slippery".
Always use a thinset mortar that specifically says "indoor/outdoor" on the bag.
You mus...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Masonry Product: Brick Mortar
Temperature Limitations: Use above + 5 C (+40 F)
Rain Limitations: No standing water or wash out prior to setting
Wind Limitations: Protect mortar if wind will d...
Connect to your favourite weather forecaster and look for the following conditions:
Category: Masonry Product: Latex mortar patch mix in a tube
Temperature Limitations: Use above +4 C (+40 F) and below +38 C (+100 F)
Rain Limitations: No rain for 12 hours
Wind Limitations: n/a
Humidi...