Here are a few tips when it comes to re-wiring an old lamp.
Use the existing wire to pull the new wire through. You need to join them in a way that does not create a lump in the wire.
Avoiding a lump
On the old pair of wires, cut one wire shorter than the other and s...
They took the lead out...
Several years ago, throughout North America lead was removed from the solder used for making joints in copper pipes intended for carrying drinking water, just as before that we had removed lead from paint. Lead based solder is still available in stores for other tasks, ...
There are three key steps to making leak proof copper pipe joints.
Clean off both the inside of the elbow and the outside of the pipe with steel wool or a special cleaner tool.
Apply a soldering flux to both cleaned surfaces. The cleaning gets rid of contaminates and oxidation o...
