If a 6x6 or 4x4 wants to twist, it will do so and you can do little to stop it. However you can decide which end will twist!Buried pillarsIf you bury the 6x6 into a concrete pillar, the bottom will be fixed and the top will move, perhaps before you get around to locking in the rest of the deck f...
Scissors have the flat side where they two blades rub, then a cutting bevel followed by a relief bevel. So how do you sharpen them? Get the flat side flatStart by using a stone to remove any nicks that stick past the flat side. Just put the stone on the flat and grind until the entire side is ...
Dave in London, Ontario has a bathroom door that won't stay open. The frame is probably not vertical, or somebody hung the door non-vertical, so you will have to play with the hinges to get gravity working on your side. Always tighten the hings screws as a first task -- maybe they are in the rig...
It may surprise you, but more accidents happen in the shower when the shower suddenly goes cold, than when it suddenly goes hot. It seems that we just jump higher. But neither shock is agreeable, or safe.
That's why all new plumbing installations require something called a "Pressure Balancing va...
ENTRANCE DOOR HORIZONTAL ADJUSTMENTS
Entrance doors often warp from season to season and are hard to close in the winter and rattle in the summer. This requires moving the strike plate horizontally -- but the good fit changes from season to season. Don't adjust it at all -- but rather follow...
Some rooms are colder than others, or a forced air system works well for heating but not air conditioning. Although such problems may require repositioning ductwork, or adding booster fans -- the first thing to check is that the ductwork is balanced and balanced differently for the two differ...
Some door latches are just not installed snugly, while some doors warp with the seasons and are too tight part of the time and too loose the rest of the time. Typically, the strike plate needs to be moved over a fraction of an inch for a good fit. The best way to do that is to fill the existing s...
We all like the ability to reduce the intensity of a light, but not all dimmers work on all lights. First a really important distinction: Fan speed controls and light dimmers often look almost identical, but are radically different devices, not to be mixed up at the risk of burning out a motor or...