for Cold Climate Housing and much more

Last Updated: , Created: Thursday, October 14th, 1999

FOAMED-IN-PLACE: POLYURETHANE FOAM

Colour: Yellow - Orange

Thermal Resistance: RSI - .042/mm R - 6.0/in. Very High.

Cost: Professional application -- expensive

Capacity to dry out if wet: Fair

Fire Resistance: Poor: produces toxic fumes.

Fungus / Vermin Resistance: Good

Limitations:
-- Difficult to control quality of field application (temperature, humidity, workman's skill). Assure that your applicators is experienced.
-- It should never be used to fill a closed cavity as it tends to expand with age.
-- It's uneven surface is difficult to cover for fire protection when used on the inside of the house.
-- It degrades rapidly if left exposed to the sun.

Advantages:
-- Good for insulating irregular shapes.
-- Effectively seals large cracks.
-- When properly applied it is a rapid and complete method of sealing and insulating a surface.

Applications:
-- Exceptionally good for air sealing and insulating joist/header areas.
-- Used extensively for sealing window and door installations. But caution -- most one component cans on retail shelves expand too much to use to fill the entire cavity -- it will expand and jam the window. Contractors use a "non-expanding" type and fill in the space in at least three passes, waiting a little while between each pass.
-- Large surface applications should be limited to areas that are truly otherwise impossible to insulate.
-- Choose the contractor very carefully and demand references.

 


Keywords: Types, R-Value, Insulation

Article 812